|
| एमओक्यू: | 1 |
| कीमत: | To be quoted |
| मानक पैकेजिंग: | सुरक्षा दफ़्ती पैक या प्लाईवुड बॉक्स |
| वितरण अवधि: | 7 दिनों के काम |
| भुगतान विधि: | T/T |
| आपूर्ति क्षमता: | प्रति माह 1000 पीसीएस |
G5 Lamp Cap Gauge | "GO" Gauge For Bi-Pin Cap On Finished Lamps G13-7006-46A-3
Purpose: Purpose: to check dimensions E max.,F min.,F max.,and the combined pin diameter and displacement of pins (including bosses) of bi-pin caps G5 on finished lamps.
Testing: the pins of the caps on finished lamps shall enter the gauge at surface O and, when fully inserted, the surfaces of cap and gauge shall contact. In this position the end of the pins shall be co-planar with or project beyond surface X, but shall not project beyond surface Y. Each individual pin shall enter hole e1 at surface O until the face of the cap and the surface of the gauge contact.
Related gauge:
| "GO" GAUGE FOR BI-PIN CAP ON FINISHED LAMPS G13, 7006-46-3 |
|
|
| एमओक्यू: | 1 |
| कीमत: | To be quoted |
| मानक पैकेजिंग: | सुरक्षा दफ़्ती पैक या प्लाईवुड बॉक्स |
| वितरण अवधि: | 7 दिनों के काम |
| भुगतान विधि: | T/T |
| आपूर्ति क्षमता: | प्रति माह 1000 पीसीएस |
G5 Lamp Cap Gauge | "GO" Gauge For Bi-Pin Cap On Finished Lamps G13-7006-46A-3
Purpose: Purpose: to check dimensions E max.,F min.,F max.,and the combined pin diameter and displacement of pins (including bosses) of bi-pin caps G5 on finished lamps.
Testing: the pins of the caps on finished lamps shall enter the gauge at surface O and, when fully inserted, the surfaces of cap and gauge shall contact. In this position the end of the pins shall be co-planar with or project beyond surface X, but shall not project beyond surface Y. Each individual pin shall enter hole e1 at surface O until the face of the cap and the surface of the gauge contact.
Related gauge:
| "GO" GAUGE FOR BI-PIN CAP ON FINISHED LAMPS G13, 7006-46-3 |
