 |
Iec 60061 3 Standard Go And Not Go Gauge For Unmounted Bi-Pin Cap G5-7006-46-3
उत्पाद विवरण:
| उत्पत्ति के प्लेस: | चीन Dongguan |
| ब्रांड नाम: | kingpo |
| प्रमाणन: | iso9001 |
| Model Number: | 7006-46-3 |
भुगतान & नौवहन नियमों:
| Minimum Order Quantity: | 1 |
|---|---|
| मूल्य: | To be quoted |
| पैकेजिंग विवरण: | सुरक्षा दफ़्ती पैक या प्लाईवुड बॉक्स |
| प्रसव के समय: | 7 दिनों के काम |
| Payment Terms: | T/T |
| आपूर्ति की क्षमता: | प्रति माह 1000 पीसीएस |
|
विस्तार जानकारी |
|||
| ब्रांड नाम: | Kingpo | Material: | Hardness Steel |
|---|---|---|---|
| Standard: | IEC60061-3 | HRC: | C58 to C60 |
| प्रमुखता देना: | Go No Go Gauge,Iec 60061 3 |
||
उत्पाद विवरण
G5 lamp cap gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G5-7006-46-3
Purpose: to check dimensions E min., E max., F min., G max. and the combined pin diameter and displacement of pins(including bosses) of unmounted bi-pin caps G5.
Testing: the pins of the cap shall enter the gauge at surface O and, when fully inserted, the surfaces of cap and gauge shall contact. In this position the ends of the pins shall be co-planar with or project beyond surface X. Each individual pin shall enter the hole e2 until the boss of the pin and the surface of the gauge contact, but they shall not enter hole e1. The boss of the individual pin shall enter hole b at surface O until the surface of the cap and the gauge contact.
Related gauge:
| "GO" GAUGE FOR BI-PIN CAP ON FINISHED LAMPS G13, 7006-46A-3 |